Complete Fire Protection

CFP Ltd are UK based manufacturers and exporters of the FIREPLUG range of intumescent fire protection materials. The range includes intumescent strip, ventilation grills, pipe bandages and canisters, door upgrading system and the patented FIREPLUG cable passthrough system.

The FIREPLUG range covers many aspects of fire compartmentation in both new and existing buildings. All products are made using a UK brand intumescent and all of the products are tested to the relevant British Standards.


Complete Fire Protection Ltd, also supply intumescent slabs, intumescent pillows, electrical trunking closures, cable tray blocks and offer a bespoke service on our range of products.

We are also approved installers for Cape Fire Protection Boards, Promat Fire Protection Boards and Rockwool Products. Our successful completed contracts include the International Convention Centre (Birmingham), the Sheffield Arena and many shopping stores for Asda and Sainsbury.

Complete Fire Protection Ltd., not only supply the Fireplug range of intumescent fire protection products, they are also approved installers of a wide range of passive fire protection materials including Cape Fire Protection Boards, Promat Fire Protection Boards, Rockwool fire products, Cafco fire protection products and Glasroc fire protection materials. We have worked on many types of buildings protecting both structural steelwork and service penetrations as well as air sealing the building.

We will be pleased to discuss any requirements you may have.

Fireplug Intumescent Strips...

.....are available white or brown, in standard 2100mm or 1050mm lengths and is supplied self adhesive. Fireplug Intumescent Strips are also available in door sets. Packed 5 x 1050mm for single doors and 10 x 1050mm for double doors.


Fireplug IFS104, IF104, IFS204, IF204 are produced using Firefly 102 intumescent material and encased in a PVC sleeve, achieving a high degree of protection from mechanical and chemical damage.

Fireplug Profile ref IF - is in a cross section rectangular, normal sizes 10mm wide x 4mm deep (ref: IF104) for 1/2 hour protection, 20mm wide x 4mm deep (ref: IF204) for 1 hour protection.

Fireplug Profile ref IFS - differs from Fireplug IF where smoke inhibition is required. In this instance a 5mm long brush pile incorporating a polypropylene blade is inserted along the entire length of the PVC profile. Ref IFS104 for 1/2 hour protection and ref IFS204 for 1 hour protection.


Under the action of heat, the PVC profile softens as the intumescent core expands sealing the gap between the door and the door frame, through which fire and toxic gas could pass. The amount of pressure developed by the expanding intumescent is dependent on the gap to be sealed. The wider the gap the lower the pressure.. The temperature at which Fireplug Intumescent strip starts to activate is 120 - 160 oC. At this temperature no one would survive on the fireside of the door and in most cases the thermal shock would be fatal to anyone on the unexposed side opening the door. However, despite the requisite that the pressure developed by the expanding intumescent is sufficient to keep the door closed it is possible to make the door open if required.
For further details, and technical specs of our vast range of products, please visit oor website, or call on 0117 9711917.