Response Conveyor Belting Ltd
Conveyor Belts and Systems in Plymouth
37 Holly Court
St Modwen Road
Plymouth
Devon
PL6 8LG
Contact Numbers
Reviews
rubber parts factory
Ouken Rubber was founded in the year 1999,specialized in custom molded rubber products including oil seal,valve stem seal,standard and non-standard o ring,PTFE seals with wide range of material including Silicone rubber, Natural rubber, Fluoroelastomers(Viton,FKM,FPM), Nitrile(NBR), EPDM, Neoprene(CR), ACM,and Fluorosilicone.The rubber material was all compunded by ourself,That's the one way we low our cost,and we have the ability to take a job from the design stage to production in short time to satisfy your schedule. duing to we can have one cavity phototype mold made quickly for part verification prior to providing the production mold. Ouken Rubber have full production facilities including Vacuum vulcanizing machines,metal puncher, Optical vision measuring, Tensile tester, Oil seal tester,Aging tester, Oil seal radial force measuring,and all of our processes are controlled to ISO 9001:2000 standards. With growth of more then ten years, we have expanded to serve customers world wide. We are fully integrated, with capabilities from material compound , tool development to full production – including technical support and aftersales service.please refer our site www.cnrubberparts.com for more details.Thank you very much.
seanliu liu - 18/05/2011 | report this review
cooperation about the conveyor belt
Dear Sir, We,shuangma Rubber Manufacturing Limited is a new exporter,but leading factory which made the conveyor belt in China for many years, including Polyester conveyor belt, (EP), Nylon Conveyor Belt (N/N) , Cotton conveyor belt, (CC), Chevron conveyor belt, (C5). We are specialized in the conveyor belt,from 10MPa to 25MPa(DIN, X,Y,N, and RMAI and II .etc ). Hope we can do some cooperationwith you in the near future. Standards: DIN 22102, AS 1332, JISK6322 Fabric specs: EP-100 ~ EP-600 NN CC Belt width(mm): 300~2000 Length(m): 20-1000m PLY: 1-10 Cover Thickness(mm) Top Rubber: 2-16 Bottom Rubber: 0-10 Best Regards. Steven Shuangma Rubber Manufacturing Limited ( phone: +86 (532) 8666 0127, 8666 0113 ( fax: +86 (532) 8666 0112 * e-mail: hose@hosebelt.com 7 web: www.hosebelt.com
Steven Liu - 08/04/2009 | report this review
Leave your review of Response Conveyor Belting Ltd
All fields are required. Your review will appear immediately.
